LIGHTWARE HDMI-TPX-TX107 AVX HDMI 2.0 Extender
Important Safety Instructions
Please read the supplied safety instruction document before using the product and keep it available for future reference.
Introduction
The HDMI-TPX-106 and HDMI-TPX-107 series extenders with AVX technology are Lightware’s future-proof development and a natural progression from the widely popular HDMI-TPS-TX/RX97 series, allowing users to extend HDMI 2.0 signals up to 4K60 4:4:4 video resolution through a single CATx cable over distances of up to 100 meters. HDMI-TPX-TX106A model is featured with audio de-embedding function via the 5-pole Phoenix® Combicon analog audio port. Beyond the benefits of sending high-resolution video over long distances, the extenders are also capable of handling various connectivity standards, including bi-directional RS-232 and command injection over IR (output only) as well. The Gigabit Ethernet port is also a valuable addition, allowing users to connect an additional device to the network directly through the TPX extender. HDCP 2.3 and basic EDID management functionality are also among the features offered by these devices, such as their connectivity and easy integration into a wide range of AV operations and compatibility with 3rd party devices.
Compatible Devices
The product is compatible with all Lightware TPX series models and any third-party AVX devices.
Box Contents
- only for HDMI-TPX-TX106, HDMI-TPX-TX106A and HDMI-TPX-RX106 units.
- Only for HDMI-TPX-TX107 and HDMI-TPX-RX107 units.
- Only for HDMI-TPX-TX106A unit.
Front and Rear View – Transmitter (TX) Front View
- TX106 / TX106A models have one, TX107 model has two Gigabit Ethernet connectors.
- Only TX106A model is built with an analog audio output port.
Rear View
TX106/TX10A models are built with 12V, TX107 model is built with 48V DC input connector.
Front and Rear View – Receiver (RX) Front View
- RX106 model is built with one, RX107 model is built with two Gigabit Ethernet connectors.
- RX106 model is built with a 12V, RX107 model is built with a 48V DC input connector.
Status LEDs
- Gigabit Ethernet port 1GBase-T RJ45 connector for user Ethernet purpose.
- IR out TRS (3.5mm jack) output connector for an Infrared emitter unit.
- Status LEDs The LEDs give immediate feedback about the current status of the extender. See the details in the Status LEDs section.
- EDID Status LED The LED gives immediate feedback about the current status of the EDID emulation. See the details in the Status LEDs section.
- EDID button Two EDID emulation modes can be selected with the button: Learned and Transparent.
- Short press: switch between transparent and stored user EDID.
- Long press: learn and store EDID from the output of the receiver.
- Analog audio output 5-pole Phoenix connector for balanced analog audio output.
- HDMI input HDMI input port with HDMI 2.0 support for source devices.
- Factory reset button Hidden button for setting the device to factory defau
- TPX output RJ45 connector for AVX output signal transmission. See more details about the connector in the Power Supply Options and the Status LEDs sections.
- HDMI output HDMI output port with HDMI 2.0 support for sink devices.
- TPX input RJ45 connector for AVX input signal. See more details about the connector in the Power Supply Options and the Status LEDs sections.
- RS-232 port 3-pole Phoenix connector for bi-directional serial communication.
- 12V / 48V DC input DC input for local powering. Connector types by models:
- HDMI-TPX-106 series: 12V DC input with locking connector.
- HDMI-TPX-107 series: 48V DC input with 2-pole Phoenix connector.
Power Supply Options HDMI-TPX-106 series
TPX106 series extenders are able to supply remote power to each other over the TPX connector. The TPX106 series devices can be powered in any of the following ways:
HDMI-TPX-107 series
TPX107 series extenders fulfill PoE PD standard, which means the TPX port can receive power over the Ethernet line.
- HDMI-TPX-107 series extenders are not able to send remote power to each other. The TPX107 series devices can be powered in any of the following ways:
Specification
General
- Compliance…………………………………………………………………………………………………..CE
- Electrical safety………………………………………………………………………. EN 62368-1:2014
- EMC (emission)…………………………………………………………………………..EN 55032:2015
- EMC (immunity)…………………………………………………………………………..EN 55035:2017
- RoHS…………………………………………………………………………………………EN 63000:2018
- Warranty………………………………………………………………………………………………..3 years
- Operating temperature…………………………………………….0° to +50°C (+32° to +122°F)
- Operating humidity…………………………………………………. 10% to 90%, non-condensing
- Cooling………………………………………………………………………………………………….passive
Power
- Power supply option (TPX106 series)………….. Power adaptor / 12V remote powering
- Power supply option (TPX107 series)……………………………… Power adaptor / PoE PD
- Supported power source………………………………………………….100-240 V AC; 50/60 Hz
- Power consumption (TPX106 series, without remote power)…………………………..11 W
- Power consumption (TPX106 series, with remote power)……………………………… 25 W
- Power consumption (TPX107 series)……………………………………………………………11 W
- Heat dissipation (TPX106 series, without remote power)……………………….37.5 BTU/h
- Heat dissipation (TPX106 series, with remote power)……………………………85.3 BTU/h
- Heat dissipation (TPX107 series)………………………………………………………..37.5 BTU/h
Power Adaptor (TPX106 series)
- Supplied power…………………………………………………………………………………12V DC, 3A
- AC power plug……………………………………… Interchangable (EU, UK, JP/US, AUS/NZ)
- DC power plug…………………………………………. Locking DC connector (2.1/5.5 mm pin)
- Power Adaptor (TPX107 series)
- Supplied power………………………………………………………………………………48V DC, 0.3A
- AC power plug……………………………………… Interchangable (EU, UK, JP/US, AUS/NZ)
- DC power plug………………………………………………………………2-pole Phoenix connector
Enclosure
- Rack mountable……………………….yes, with UD kit / UD kit double / 1U high rack shelf
- Enclosure material…………………………………………………………………………….. 1 mm steel
- Dimensions (mm / inch)……………..100.4 W x 131.9 D x 26 H (3.95 W x 5.19 D x 1 H)
- Weight………………………………………………………………………………………..476 g (1.05 lbs)
Video Ports
HDMI input/output
- Connector type……………………………………………………19-pole HDMI Type A receptacle
- AV standard…………………………………………………………………………… DVI 1.0, HDMI 2.0
- HDCP compliance……………………………………………………………………………….HDCP 2.3
- Color space…………………………………………………………………………………… RGB, YCbCr
- Supported resolutions at 8 bits/color *…………………….up to 4096×[email protected] (4:4:4)
- Audio formats………………. 8-channel PCM, Dolby TrueHD, DTS-HD Master Audio 7.1
TPX input/output
- Connector type………………………………………………………………………….. RJ45 connector
- Power over Ethernet (TPX106 series)………………………………….. 12V remote powering
- Power over Ethernet (TPX107 series)…………………………………PoE PD (IEEE802.3af)
- Data rate…………………………………………………………………………………………. 10GBase-T
- Compliance…………………………………………………………………………………….. SDVoE AVX
- HDCP compliance……………………………………………………………………………….HDCP 2.3
- Transferred signals…………………………………..Video, Audio, RS-232, Infrared, Ethernet
- Color space…………………………………………………………………………………… RGB, YCbCr
- Video latency (TPX output)……………………………………..0 frame (five lines/ under 8ms)
- Compression ratio (TPX output)……………………………………………………………1.4 to 1 **
- Supported resolutions at 8 bits/color *…………………….up to 4096×[email protected] (4:4:4)
- Audio formats………………. 8-channel PCM, Dolby TrueHD, DTS-HD Master Audio 7.1
- All standard VESA, CEA and other custom resolutions up to 600MHz (HDMI2.0) are supported.
- Compression is applied only if the AV signal is above HDMI 1.4 standard.
Audio Ports
Analog audio output (HDMI-TPX-TX106A)
- Connector type……………………………………………………………..5-pole Phoenix connector
- Audio formats……………………………………………………………………………..2-channel PCM
- Sampling frequency………………………………………………………………………………….48 kHz
- Signal transmission……………………………………………………………………. Balanced signal
Control Ports
Ethernet port
- Connector type……………………………………………………………….. RJ45 female connector
- Number of connectors per unit (106 series / 107 series)………………………………….1 / 2
- Ethernet data rate…………………………………………1GBase-T, full duplex with autodetect
- Power over Ethernet (PoE)…………………………………………………………….Not supported
- RS-232 serial port
- Connector type……………………………………………………………..3-pole Phoenix connector
- Default settings……………………………………………………………………….57600 BAUD, 8N1
- Infrared output port
- Connector type……………………………………………………..3.5mm TRS (approx. 1/8” jack)
- Output signal………………………………………………………………………… Modulated (38kHz)
- Operation mode…………………………..Command injection (only with 3rd-party software)
Mechanical Drawings
The following drawings present the physical dimensions of the HDMI-TPX-100 series extenders. Dimensions are in mm.
Front View
Ventilation
¢ Pay attention to the ventilation holes when designing the system. Top and side ventilation holes must not be covered.
Connecting Steps
Transmitter Side
Transmitter Side
Receiver Side
Mounting Options
For the mounting of the devices Lightware supplies optional accessories for different usages. The device has two mounting holes with inner thread on the bottom side. Fasten the device by the screws enclosed to the accessory.
UD Mounting Pro P140
The UD Mounting Plate F110 makes it easy to mount a single device on any flat surface, e.g. furniture. The UD Mounting Plate F120 and UD Mounting Pro P140 provide the same for one half-rack or two quarter-rack sized units. Pocket-sized devices can also be fastened to them. The UD Mounting Pro P140 makes easy and quick changing of the extenders under the desk available. To order mounting accessories, please contact [email protected]
- Using different (e.g. longer) screws may cause damage to the device.
- The extenders are quarter-rack sized.
Locking DC Plug
Twist 90° clockwise to lock.
- Only HDMI-TPX-106 series extenders are built with locking DC input connector
Firmware Upgrade
Lightware Device Updater (LDU2) is an easy and comfortable way to keep your device up to date. Establish the connection via Gigabit Ethernet port. Download and install LDU2 software from the company’s website, www.lightware.com, where you can find the latest firmware package as well.