HOVER-1 H1-MFSC Rideables Scooter User Manual

Always wear a properly fitted helmet that complies with CPSC or CE safely standards when you ride your scooter.
Correct Fitting: Make sure your helmet covers your forehead.Incorrect Fitting: The forehead is exposed and vulnerable to serious injury.

WARNING!

PLEASE READ THE USER MANUAL THOROUGHLY.
Failure to follow the basic instructions and safety precautions listed in the user manual can lead to damage to your Scooter, other property damage, serious bodily injury, and even death.
Thank you for purchasing the Hover-1 Scooter. Please read all instructions carefully before using and retain this manual for future use and reference.
This manual applies to the Hover-1 My First Scooter.

In order to avoid dangers that are caused by collisions, falls, and loss of control, please learn how to ride the scooter safely.
You can learn operating skills by reading the product manual and watching videos.
This manual includes operating instructions and precautions, and users must read it carefully and follow the instructions.
All users are responsible for any consequences caused by violating warning contents or prompt operations. Hover-1 can not be held liable.

ATTENTION

Use only the supplied charger with this scooter. Charger Manufacturer: DONGGUAN GREEN POWER ONE CO. LTD Model: GA09-1680600US
The operating temperature range of the charger is 32-104° F (0-40° C).
The operating temperature range of the Scooter is 32-104° F (0-40° C).
Do not ride on icy or slippery surfaces.
Read the operation manual and warning labels before riding. 6. Store the Scooter in a dry, ventilated environment. 7. When transporting the Scooter, avoid violent crashes or impacts.

LOW-TEMPERATURE WARNING
Low temperature will affect the lubrication of moving parts inside the Scooter, increasing internal resistance. At the same time, in low temperatures, the discharge capacity and the capacity itself of the battery will be significantly decreased.
Use caution when riding the Scooter in cold temperatures (below 40 degrees F).
Doing so may increase the risk of mechanical failures of the Scooter, which may lead to damage to your Scooter, other property damage, serious bodily injury, and even death.
SAFETY INSTRUCTIONS

Keep the Scooter away from heat sources, direct sunlight, humidity, water, and any other liquids.
Do not operate the Scooter if it has been exposed to water, moisture, or any other liquids to prevent electric shock, explosion, and/or injury to yourself and damage to the Scooter.
Do not use the Scooter if it has been dropped or damaged in any way.
Repairs to equipment should only be performed by the manufacturer. Improper repair voids the warranty and may place the user at serious risk.
Do not puncture or harm the exterior surface of the product in any way.
Keep the Scooter free from dust, lint, etc.
Do not use your Scooter for anything other than its intended use or purpose. Doing so may damage the Scooter or lead to property damage, injury, or death.
This product is not a toy. Keep out of reach of children.
Do not expose batteries, battery packs, or batteries installed to excessive heat, such as direct sunlight, or open flame.
Do not allow hands, feet, hair, body parts, clothing, or similar articles to come in contact with moving parts, wheels, or drive-train, while the Scooter is running.
Do not operate, or allow others to operate. the Hover-1 Scooter, until the user understands all instructions, warnings, and safety features described in this manual.
Check with your doctor if you have a medical condition that could affect your ability to use the Hover-I Scooter.
Persons with head, back, or neck ailments or prior surgeries to those areas of the body are not recommended to use this Hover-1 Scooter.
Do not operate if you are pregnant. have a heart condition, or have both.
Persons with any mental or physical conditions that may make them susceptible to injury or impair their physical or mental capabilities to recognize. understand and perform all of the safety instructions and to be able to assume the hazards inherent in unit use, should not use the Hover-1 Scooter.

NOTES:
In this manual, the above symbol with the word NOTES” indicates instructions or relevant facts the user should remember prior to using the Scooter.
CAUTION!
In this manual, the above symbol with the word “CAUTION” indicates a hazardous situation that, if not avoided, can cause minor or moderate injury.
WARNING!
In this manual, the above symbol with the word “WARNING” indicates a hazardous situation that, if not avoided, can cause death or serious injury.
SERIAL NUMBER
Please keep the serial number on file for warranty claims as well as proof of purchase.
WARNING!
WARNING: Prolonged Exposure to UV Rays. Rain and the Elements May Damage the Enclosure Materials. Store Indoors When Not in Use.

INTRODUCTION

The Scooter is a personal transporter. Our technology and production processes are developed with strict testing for each Scooter. Operating the Scooter without following the contents of this manual may lead to damage to your Scooter or bodily injury.
This manual is designed to give you the information you need for the safe operation and maintenance of your new Scooter.Please read it thoroughly before riding your Scooter.FEATURES/PARTS

Handlebars (L)
Electric Throttle
Handlebars (R)
Steering Column/Height Adjustment
Locking Clamp
Foot Brake
Footpad/ Deck
Folding Hinge
Rear Hub Motor
Deck Lights
Power Button
Charge Port
Headlights
Folding Lock

WARNING
Any Scooter that does not work properly can cause you to lose control and fall. Inspect the entire device thoroughly before every ride, and do not ride it until any problems have been corrected.

SPECIFICATIONS

Model:……………………………………………..HI-MFSC
Net Weight:……………………………………..10.6 lbs (4.8 kg)
Max Supported Weight:……………………80 lbs (36 kg)
Min Supported Weight:……………………. 44 lbs (20 kg)
Max Speed:……………………………………… Up to 5 mph (8 km/h)
Max Distance Range:………………………Up to 1.8 miles (3 km)
Battery Type:…………………………………..Lithium-Ion
Motor Power:…………………………………80W Brushless Motor
Battery Voltage:……………………………..14.4 V
Battery Capacity:……………………………2.0 Ah
Power Requirement:………………………AC 100-240V. 50/60 Hz
Unfolded Size:………………………………32.5H x 23.7L x 12.6W in (82.5H x 601. x 32W cm)
Folded Size:……………………………………6.3H x 23.7L x 12.6W in (16H x 601. x 32W cm)
Tire Type:……………………………………..Non-Pneumatic Solid Tres
Tire Size:………………………………………. 4.5 Inch Front (11.4 cm) 4.5 Inch Back (11.4 cm)
Brake Type:…………………………………… Mechanical Brakes

PARTS LIST

My First Electric Scooter
Charger

ASSEMBLING YOUR SCOOTER

PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY
UNFOLDING YOUR SCOOTER.
To unfold your scooter, press the folding lock button and pull the handlebars away from the folding hinge to unlock the hinge. Pull the bars upwards into place until you hear them click into place. Do not attempt to operate unless the handlebars are securely locked in place.FOLDING YOUR SCOOTER.
To fold your scooter press the folding lock button and pull the handlebars away from the folding hinge to unlock the hinge. Pull the base down into place until you hear it click into place.

CONTROLS AND DISPLAY

POWER BUTTON
Power ON Scooter – Press once.
Power OFF Scooter – Press once.BEFORE RIDING
WARNING
Any Scooter that does not work properly can cause you to lose control and fall. Do not ride a Scooter with a part that is damaged; replace the damaged port before riding.
It is important that you fully understand all elements of your Scooter. If these elements are not used correctly, you will not have full control of your Scooter. Before you ride, learn the functions of the various mechanisms on your scooter.
Practice using these elements of your Scooter at slower speeds in a flat, open area before taking the Scooter out in public areas.
PRE-RIDE CHECKLIST
Ensure that your Scooter is in proper working order each and every time you ride. If a part of the scooter does not function correctly, please contact our Customer Support Center.

Ensure the battery is fully charged before riding your scooter.
If the Scooter is not to be used for an extended period of time, you may need to recharge the battery every 2 months to maintain the battery life.
Please wear all appropriate safety and protective gear as previously mentioned in the User Manual before operating your Scooter.
Make sure to wear comfortable clothes and flat closed-toe shoes when operating your Scooter.
Please carefully read the Operation Manual, which will assist in explaining the basic working principles and provide tips on how to best enjoy your experience.

SAFETY PRECAUTIONS

The first rule in safe riding is to use common sense.
Different localities and countries have different laws governing riding on public roads, and you should check with local officials to ensure you are complying with these laws.
Hover-1 is not liable for tickets or violations given to riders who do not follow local laws and regulations.

For your safety, always wear a helmet that meets CPSC or CE safety standards. In the event of an accident, a helmet can protect you from serious injury and in some cases, even death.
Obey all local traffic laws. Obey red and green lights. one-way streets. stop signs. pedestrian crosswalks, etc.
Ride with the traffic, not against it.
Ride defensively; expect the unexpected.
Give pedestrians the right of way.
Do not ride too close to pedestrians and alert them if you intend to pass them from behind.
Slow down at all street intersections and look to the left and right before crossing.

Your Scooter is not equipped with reflectors. It is not recommended that you ride in conditions of low visibility.
If you are riding your scooter in low-visibility conditions, ensure your LED light is fumed on, and that you are wearing bright, reflective clothing.
WARNING
When you ride In low-visibility conditions such as fog, dusk, or night, you might be difficult to see, which could lead to a collision. To Increase your level of safety, be sure to wear bright. reflective clothing when riding in poor lighting conditions.
Think about safety when you ride. You can prevent many accidents if you think about safety. Below is a helpful checklist for riders.
SAFETY CHECKLIST

Do not ride above your skill level. Ensure you have had enough practice with all functions and features of your Scooter.
Do not ride too fast — with increased speed comes increased risk. If you are moving at a higher speed, small bumps can turn into large impacts, leading to a higher risk of injury if an accident occurs.
Do not ride with pets.
Before stepping on your Scooter, make sure it is placed flat on level ground and the power is on.
Do not try to open or modify your Scooter. Doing so, voids the manufacturer’s warranty and may cause your Scooter to fail, resulting in injury or death.
Do not use the Scooter in a manner that would put people or property in danger.
If you and your friend (s) are riding Scooter scooters together. be sure to keep a safe distance between each other to prevent collisions, property damage, serious injuries, or even death.
Be sure to keep your feet on the scooter at all times. Moving your feet off your scooter while driving is dangerous and may cause the scooter to stop or veer sideways.
Do not operate the Scooter while under the influence of drugs and/or alcohol.
Do not operate the Scooter when you are restless or sleepy.
Use your best judgment to keep yourself out of dangerous situations with your Scooter.
Do not ride your Scooter off of curbs, or ramps. or attempt to operate in a skate part, empty pool, or in any way similar to a skateboard. Misuse of your Scooter, voids the manufacturer’s warranty and may lead to injury or damage.
Do not abuse your Scooter, doing so can damage your unit and cause failure to the operating system which may lead to injury. Physical abuse, including dropping your Scooter, voids the manufacturer’s warranty.
Do not operate in or near puddles of water, mud, sand, stones, gravel, debris, or near rough and rugged terrain.
The Scooter can be used on paved surfaces that are flat and even. If you encounter uneven pavement, please lift your Scooter over and past the obstruction.
Do not ride in inclement weather: snow, rain, hail, sleek, on icy roads, or in extreme heat or cold.
Bend your knees when riding on the bumpy or uneven pavement to absorb the shock and vibration and help you keep your balance.
If you are unsure if you can safely dde on a specific terrain, step off and carry your Scooter. ALWAYS BE ON THE SIDE OF CAUTION.
Do not attempt to ride over bumps or objects greater than 1/2 in. even when prepared and bending your knees.
PAY ATTENTION – look at where you are riding and be conscious of the road conditions, people, places, property, and objects around you.
Do not operate the Scooter in crowded areas.
Operate your Scooter with extreme caution when indoors, especially around people, property, and narrow spaces.
Do not operate the Scooter while talking, texting, or looking at your phone.
Do not add your Scooter where it is not permitted.
Do not ride your Scooter near motor vehicles or on public roads.
Do not travel up or down steep hills.
The Scooter is intended for use by a single individual. DO NOT attempt to operate the Scooter with two or more people.
Do not carry anything while riding the Scooter.
Individuals with a lack of balance should not attempt to operate the Scooter.
Pregnant women should not operate the Scooter.
Young children and the elderly should not operate the scooters.
At higher speeds, always take into consideration longer stopping distances.
Do not attempt to jump on or off your Scooter.
Do not attempt any stunts or tricks with your Scooter.
Do not ride the Scooter in dark or poorly lit areas.
Do not ride the Scooter near or over potholes, cracks, or uneven pavement or surfaces.
Do not operate your Scooter off-road.
Do not turn sharply, especially at high speeds.
Do not exceed the maximum or minimum weight limits.
Avoid driving the Scooter in unsafe places, including near areas with flammable gas, steam, liquid, dust, and fiber, which could cause fire and explosion accidents.
Do not operate near swimming pools or other bodies of water.
After using the rear wheel for 6 months, it is necessary to maintain it once. Disassemble the front and rear wheel decorations, remove dust and dirt, and then add lubricating oil appropriately along the bearing periphery. Refill the decorative parts after adding lubricating oil.
The motor is 80W. When comfortable riding the scooter, power it on. You must first kick off the ground and then press the throttle for the motor to start. To slow down the scooter, press the electronic brake.
After the scooter has been used for 3 months, it is necessary to check the machine screws regularly for looseness.

WARNING:
To reduce the risk of injury, adult supervision is required. Never use in roadways, near motor vehicles, on or near steep inclines or steps, swimming pods, or other bodies of water; always wear shoes, and never allow more than one rider.

RIDING YOUR SCOOTER

FAILURE TO FOLLOW ANY OF THE FOLLOWING SAFETY PRECAUTIONS CAN AND MAY LEAD TO DAMAGE TO YOUR Scooter, VOID YOUR MANUFACTURER WARRANTY, LEAD TO PROPERTY DAMAGE, CAUSE SERIOUS BODILY INJURY, AND CAN LEAD TO DEATH.
OPERATING YOUR Scooter
Make sure the Scooter is fully charged before the first initial use. Before turning on your Scooter, ride it like a normal kick scooter to get comfortable with the Scooter before using it with the motor.
When comfortable riding the scooter, power it on. For the motor to activate, you must first start riding the scooter and then push the Throttle down. The motor will only activate if you are moving at I .8mph or more
To slow down the scooter, release the throttle. This will stop the motor and slow you down. Also, press the mechanical brake with your foot to manually slow down the scooter. The Scooter is equipped with a built-in 80 Watt Brushless Motor which allows you to accelerate (up to 5 mph) and decelerate.
To turn, use the handlebar to turn in the direction you wish to turn.
The Scooter can be operated manually if you do not wish to use the motor.
As you get comfortable on the Scooter, you will notice it becomes easier to maneuver. Remember at higher speeds, it is necessary to shift your weight to overcome the centrifugal force.
Bend your knees if you encounter bumps or uneven surfaces, then dismount and carry your Scooter to a safe operating surface.
That all guards and pads originally supplied by the manufacturer are in the proper place and in serviceable condition.
That the braking system is functioning properly.
That all safety labels are in place and understood by the operator and any passenger.
That any and all axle guards or other covers or guards supplied by the manufacturer are in place and in serviceable condition.
That tires are in good condition and have sufficient tread remaining.
Components shall be maintained and repaired in accordance with the manufacturer’s specifications and using only the manufacturer’s authorized replacement parts with installation performed by dealers or other skilled persons.
WARNING
Do not turn sharply or at high speeds to avoid danger. Do not turn or fade quickly along slopes, as it may cause injury.
WEIGHT AND SPEED LIMITATIONS
Speed and weight limits are set for your own safety. Please do not exceed the limits listed here in the manual.

Maximum Weight: 80 lbs
Minimum Weight: 44 lbs
Maximum Speed: Up to 5 mph

WARNING
Overweight exertion on the Scooter may increase the possibility of injury or product damage.
OPERATING RANGE
The Scooter can travel a distance of up to 1.8 miles on a fully charged battery in ideal conditions. The following are some of the major factors that will affect the operating range of your Scooter.

Terrain: Riding distance is highest when riding on a smooth, flat surface. Riding uphill and/or on rough terrain will reduce distance significantly.
Weight: A lighter user will have further range than a heavier user.
Ambient temperature: Please ride and store the Scooter under recommended temperatures, which will increase driving distance; battery life, and overall performance of your Scooter.
Speed and Riding Style: Maintaining a moderate and consistent speed while riding produces maximum distance. Traveling at high speeds for extended periods, frequent starts and stops, idling and frequent acceleration or deceleration will decrease the overall distance.

SAFETY ALERTS
While riding your Scooter, if there is a system error or an illegal operation occurred, the Scooter will prompt the user in a variety of ways. The following are common occurrences where you will see Safety Alerts. These notices should not be ignored, but appropriate action should be taken to correct any illegal operation, failure, or errors.

Prohibited riding surfaces (uneven, too steep, unsafe, etc.)
The battery voltage is too low.
The Scooter is still charging.
Overheating, or motor temperature is too high.
If the system enters protection mode, the alarm indicator will light up. This typically occurs when the battery is about to run out of power.
If any or both tires are blocked, the Scooter will stop after 2 seconds.
When the battery level has depleted below protection mode, the Scooter motor will power off after 15 seconds.

While sustaining a high discharge current during use (such as riding up a steep slope for a long period of time), the Scooter motor will power off after 15 seconds.

CHARGING YOUR SCOOTER

CHARGING THE Scooter

Ensure that the charging port is clean and dry.
Make sure that there is no dust, debris, or dirt inside the port.
Plug the charger into a grounded wall outlet.
Connect the cable with the power supply (100V – 240V; 50/60 Hz).
Align and connect the 1-pin charging cable to the charging port of the Scooter. DO NOT FORCE OR BEND THE CHARGING CABLE INTO THE CHARGING PORT, AS IT MAY CAUSE THE PRONGS TO BEND OR BREAK.
The charging indicator light on the wall plug should change to RED, indicating that your Scooter is now being charged.
When the RED indicator light on the wall plug turns GREEN, then your Scooter is fully charged.
A full charge may take up to 4 hours.
After fully charging your Scooter, unplug the charger from your Scooter and from the power outlet.

BATTERY CARE / MAINTENANCE

BATTERY SPECIFICATIONS
Battery Type: Rechargeable lithium-ion battery
Charge Time: Up to 4 hours
Voltage: 14.4V
Initial Capacity: 2.0 Ah
Working Temperature: 32°F – 104°F
Charging Temperature: 32°F – 104°F
Storage lime: 1 year
Storage Temperature: 32°F-104°F
Storage Humidity: 5% – 85%
BATTERY MAINTENANCE
The lithium-ion battery is built into the Scooter. Do not disassemble the Scooter to remove the battery or attempt to separate it from the Scooter.

When charging the Scooter, please use the enclosed 1-pin charging cable or otherwise ensure that the battery charging conditions are met.
Do not connect or attach the Scooter or the battery to a power supply plug or directly to a car’s cigarette lighter.
Do not place the Scooter or batteries near a fire, or in direct sunlight. Heating the Scooter and/or the battery con cause additional heating, breaking, or ignition of the battery inside the Scooter.
Do not continue charging the battery if it does not recharge within the specified charging time. Doing so may cause the battery to become hot, and rupture. or ignite.

To preserve natural resources, please recycle or dispose of batteries properly. This product contains lithium-ion batteries. Local, state or federal laws may prohibit the disposal of lithium-ion batteries in ordinary trash. Consult your local waste authority for information regarding available recycling and/or disposal options.
WARNING
Failure to follow the safety precautions listed below could lead to serious bodily injury and/or death.

Do not attempt to modify, change, or replace your battery.
Do not use your Scooter if the battery begins to emit odor, overheats, or begins to leak.
Do not touch any leaking materials or breathe fumes emitted.
Do not allow children and animals to touch the battery.
The battery contains dangerous substances, do not open the battery or insert anything into the battery.
Please only use the charger provided by Hover-1.
Do not attempt to charge the Scooter if the battery has discharged or emits any substances. In that case, immediately distance yourself from the battery in case of fire or explosion.
Lithium-ion batteries are considered to be hazardous materials. Please follow all local, state, and federal laws in regard to recycling, handling, and disposing of Lithium-ion batteries.

WARNING
SEEK IMMEDIATE MEDICAL ASSISTANCE IF YOU ARE EXPOSED TO ANY SUBSTANCE THAT S EMITTED FROM THE BATTERY.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1 J This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC INSTRUCTIONS FOR A CLASS B DIGITAL DEVICE OR PERIPHERAL
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

CARE & MAINTENANCE

Do not expose the Scooter to liquid, moisture, or humidity to avoid damage to the product’s internal circuitry.
Do not use abrasive cleaning solvents to clean the Scooter.
Do not expose the Scooter to extremely high or low temperatures as this will shorten the life of the Scooter, destroy the battery, and/or distort certain plastic parts.
Do not dispose of the Scooter in the fire as it may explode or combust.
Do not expose the Scooter to contact with sharp objects as this will cause scratches and damage.
Do not let the Scooter fall from high places, as doing so may damage the internal circuitry.
Do not attempt to disassemble the Scooter.
Use only the charger provided by Hover-1.

WARNING
Avoid using water or other liquids for cleaning. If water or other liquids enter the Scooter, It will cause permanent damage to the internal components.
WARNING
Users who disassemble the Scooter scooter without permission will void the warranty

WARRANTY

For warranty information, please visit us at: www.hover-1.com
Manufacturer: DGL Group, Ltd. 195 Raritan Center Parkway Edison, NJ 08837, USA
Affix Serial Number Label Here:…………………
@RideHoverl
@RideHoverl
@RideHoverl
www.Hover-l.com