BLAUPUNKT Portable Alarm Clock Radio with AM/FM Band Owner’s Manual
Portable alarm clock radio with AM/FM band
SAFETY INSTRUCTIONS
- Read Instructions – All the safety and operating instructions must be read before the product is operated.
- Retain Instructions – The safety and operating instructions should be kept with the product for future reference.
- Heed warnings – All warnings on the product and in the operating instructions should be adhered to.
- Follow instructions – All operating and users’ instructions should be followed.
- Water and moisture – To reduce the risk of fire or electric shock, do not expose the product to train, dripping, splashing or excessive moisture such as in a sauna or bathroom. Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool (or similar).
- Object and Liquid Entry – Never push objects of any kind into I this product through openings, as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. Do not place any object containing liquid on top of the product.
- Servicing – Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel. - Replacement parts – When replacement parts are required, ensure that the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.
- Clean your unit with a soft cloth moistened only with mild soap and water. Stronger agents such as benzene, thinner or similar materials can damage the surface of the unit. Make sure the unit is unplugged before cleaning.
- Battery
1) The batteries must not be exposed to excessive heat such as sunshine, fire or the like.
2) The batteries should be drawn to the environmental aspects of battery disposal.
3) Battery usage CAUTION – to prevent battery leakage which may result in body injuries, property damage, or damage to the apparatus:
-Install all batteries correctly.+ and – as marked on the apparatus.
-Remove batteries when the unit is not used for a long time.
NOTICE
This product complies with the radio interference requirements of the European community.
Your products is designed a manufactured with high quality materials and components, which can be recycled an reused.
When this crossed-out wheeled bin symbol is attached to a product it means that the product is covered by the European Directive 2002/96/EC. Please inform yourself about the local separate collection system for electrical and electronic products. Please cat according to your local rules and do not dispose of your old products with your normal household waste. Correct disposal of your old product helps to prevent potential negative consequences for the environment and human health.
Your product contains batteries covered by the European Directive 2006/66/EC. which cannot be dispose with normal household waste. Please inform yourself about the local
rules on separate collection of batteries because correct disposal helps to prevent negative consequences for the environmental and human health.
Environmental information
All unnecessary packaging has been omitted. We have tried to make the packaging easy to separate into three materials: cardboard (box),polystyrene foam(buffer) and poly ethylene (bags, protective foam sheet). Your system consists of material which can be recycled and reused if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging materials, exhausted batteries and old equipment. Recording and playback of material might require consent. See Copyright Act 1956 and The Performer’s Protection Acts 1958 to 1972.
Operation interface
Power setting
DC power: Using the supplied power adaptor connect the DC power jack and plug on another terminal with wall socket in order to power. The display will light on in case of the power
connection successfully.
Battery power:
open the battery door on the rear side of unit; insert 4 pcs AA size dry batteries into the compartment according to the engraved positive and negative polarity indicates, then close the battery door. Please replace with new fresh battery in case of power exhausted. The output sound will deform and stop playback in case of battery power is getting weak.
Caution:
please do not install different brand battery, or old and new batteries together; please take out the battery in case on no operation in a long period; please disposal the exhausted battery
in an environmental friendly way.
Clock and alarm operation
Clock time setting:
Press the POWER button enter to the clock time interface; press and hold the CLOCK SET button till the display flare; press the PRESET+/- button or turn the TUNING knob to select the time format between 12 and 24 hours; press CLOCK SET button to confirm the selection; press the PRESET+/button orturn the TUNING knob to adjust the desirable hour and minutes setting; then press CLOCK SET button to confirm selection and finish the clock time setting.
Alarm setting:
Press and hold the AL SET button 3 seconds to start the alarm setting; press the PRESET+/- button or turn the TUNING knob to select and setthe alarm hour/minute/alarm source(buzz or radio)/alarm volume level (5-10-15-20-25) setting; and press AL SET button to confirm the selection and finish the setting. The alarm bell icon will show on display after the alarm
setting successfully.
Snooze:
When the alarm is ring up, short press VOL+/- or POWER button(front panel button) to cancel the alarm sound, then the alarm will wake up you again at same time in the next comingdate; or short press the any top buttons (like PE SET+/-, but beside TUN I NG knob) enterto the snooze time(bell icon fiare), and the alarm will ring up after9 minutes;To cancel the snooze, please press POWER button on front panel.
Notes:
a. The clock time and alarm is only workable when the battery power or AC power is available on the unit. Please double check and re-set them in case of power interrupted
b. Short press the AL SET button can turn on or off the alarm setting.
c. lfyou select radio as the alarm source, the pre-used or current radio station will set as the alarm source. I d. The alarm sound will last 60 minutes.
e. Please adjust the alarm volume setting in case the alarm sound is too low or loud.
Radio(AM/FM band)
Before start the radio listening, please full extent the telescopic antenna and try to move the radio next to the window in order to get better reception. Press the POWER button switch on or off the radio mode; press the AM/FM button to switch the radio band; turn the TUNING knob to adjust the radio frequency step by step; press VOL+/- button to adjust the volume for listening. Auto scan: press and hold the PRESET+/- button 3 seconds to auto scan the available station in upward or downward frequency, the radio will stop and play the station automatically once be found.
Auto scan:
press and hold the PRESET+/- button 3 seconds to auto scan the available station in upward or downward frequency, the radio will stop and play the station automatically once be found.
frequency, the radio will stop and play the station automatically once be found.
Preset and memory station(all-in-one, up to 50 FM and 20 AM
stations max.):
press and hold the PROG button 3 seconds to scan and save the available station automatically; short press the PRESET+/- button to pick up the preset station.
Manual preset station:
turn the TUNING knob or PRESET+/button to get your favorite station; then short press the PROG button; and short press the PRESET+/- button to adjust the preset station number you desire to be saved; press the PROG button again to confirm the operation. The previous preset station will be replaced in case of this new operation be selected.
Reception improvement:
Please try to put the unit next window for listening; try to full extent the antenna and adjust the antenna direction; please check the battery power status in case of the output is getting weak and weak; try to turn another frequency; move the unit to another position for listening.
Sleep:
in radio mode, you can short press the SLEEP button to select sleep time between (OFF/ 15 / 30 / 45 / 60 / 75 / 90), and the
radio will turn off when the time is being.
Headphone:
you can connect your headphone with 3.5mm stereo headphone jack; then the sound will output from headphone and mute the loudspeaker. Try to adjust the properly
volume level for your comfortable listening.
Specification:
FM frequency: 87.5-108MHz
AM frequency: 522-1620KHz
Output power: 1.2W RMS
Power source: DC IN SV/1 A
Battery power(4 x 1.SV AA battery, not included)
Power consumption: 3W
Standby power consumption:< 0.SW
(The above spec may update without prior notice)
Read More About This Manual & Download PDF: