ASUS GT-AX6000 Rog Raoture Dual Band Gaming Router User Guide

ASUS GT-AX6000 Rog Raoture Dual Band Gaming Router User Guide
ASUS GT-AX6000 Rog Raoture Dual Band Gaming Router User Guide  & troubleshooting 1

Hardware Explanations

ASUS GT-AX6000 Rog Raoture Dual Band Gaming Router User Guide  & troubleshooting 2

Specifications

DC Power adapter DC Output: +19V with 2.37A current

DC Output: +19.5V with 2.31A current

Operating Temperature 0~40oC Storage 0~70oC
Operating Humidity 50~90% Storage 20~90%

One Router Setup Steps

Prepare your Modem

  1. Unplug the power of cable / DSL modem. If it has a battery backup, remove the battery.
    ASUS GT-AX6000 Rog Raoture Dual Band Gaming Router User Guide  & troubleshooting 3
  2. Connect your modem to the 2.5G/1G WAN port at the back side of the router with the network cable provided.
  3. Power on the modem. Plug modem to the power outlet and power on.
    ASUS GT-AX6000 Rog Raoture Dual Band Gaming Router User Guide  & troubleshooting 4
  4. Check the modem LED lights to ensure the connection is active.
    ASUS GT-AX6000 Rog Raoture Dual Band Gaming Router User Guide  & troubleshooting 5
    If you are using DSL for internet, you will need your username / password from your Internet service provider (ISP) to properly configure your router.

Install your Router

  1. Plug the adapter into the DCIN port, and press the Power switch.
    ASUS GT-AX6000 Rog Raoture Dual Band Gaming Router User Guide  & troubleshooting 6
  2. The power LED will light up when the hardware is ready.
    ASUS GT-AX6000 Rog Raoture Dual Band Gaming Router User Guide  & troubleshooting 7
  3. [App] On your iOS or Android mobile device, go to the app store, search for ASUS Router, and download the app.
    ASUS GT-AX6000 Rog Raoture Dual Band Gaming Router User Guide  & troubleshooting 8
    ASUS GT-AX6000 Rog Raoture Dual Band Gaming Router User Guide  & troubleshooting 9
    ASUS GT-AX6000 Rog Raoture Dual Band Gaming Router User Guide  & troubleshooting 10
    ASUS GT-AX6000 Rog Raoture Dual Band Gaming Router User Guide  & troubleshooting 11
    ASUS GT-AX6000 Rog Raoture Dual Band Gaming Router User Guide  & troubleshooting 12
  4. [App] On your iOS or Android mobile device, tap Settings > Wi-Fi, connect to the default network SSID shown on the product label on the back side of the router. Or scan the QR code on the product label to connect the default network SSID.
    ASUS GT-AX6000 Rog Raoture Dual Band Gaming Router User Guide  & troubleshooting 13
    XX refers to the last two digits of MAC address. You can find it on the label on the back of your router.
  5. [App] Launch ASUS Router App and follow the instructions to complete the setup.
    ASUS GT-AX6000 Rog Raoture Dual Band Gaming Router User Guide  & troubleshooting 14
  6. [Wired] Connect your PC to LAN port at the back side of the router using an additional network cable.
    ASUS GT-AX6000 Rog Raoture Dual Band Gaming Router User Guide  & troubleshooting 15
    [Wireless] Connect to the network with default SSID shown on the product label on the back side of your router “ASUS_ XX”.
    ASUS GT-AX6000 Rog Raoture Dual Band Gaming Router User Guide  & troubleshooting 16
  7. [Wired / Wireless] Open a web browser.
    You will be redirected to the ASUS Setup Wizard. If not, navigate to https://router.asus.com.
    Follow the instructions to complete the setup.ASUS GT-AX6000 Rog Raoture Dual Band Gaming Router User Guide  & troubleshooting 17

FREQUENTLY ASKED QUESTIONS

Q1: Where can I find more information about the wireless router?

Networks Global Hotline Information

Area Country/ Region Hotline Number Service Hours
Americas USA Canada 1-812-282-2787 8:30-12:00 EST Mon-Fri
9:00-18:00 EST Sat-Sun

ASUS GT-AX6000 Rog Raoture Dual Band Gaming Router User Guide  & troubleshooting 18 NOTES

ASUS Recycling/Takeback Services

ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components, as well as the packaging materials. Please go to https://csr.asus.com/english/Takeback.htm for the detailed recycling information in differentregions.

REACH

Complying with the REACH (Registration, Evaluation, Authorisation, and Restriction of Chemicals) regulatory framework, we published the chemical substances in our products at ASUS REACH website at https://csr.asus.com/english/REACH.htm

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

  • This device may not cause harmful interference.
  • This device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correctthe interference by one or more ofthe following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

ASUS GT-AX6000 Rog Raoture Dual Band Gaming Router User Guide  & troubleshooting 19 WARNING! Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Prohibition of Co-location

This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.

IMPORTANT NOTE:

Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC exposure compliance requirement, please follow operation instruction as documented in this manual.This device is restricted forindoor use.

ASUS GT-AX6000 Rog Raoture Dual Band Gaming Router User Guide  & troubleshooting 20 WARNING! This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 25cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.

Compliance Statement of Innovation, Science and Economic Development Canada (ISED)

This device complies with Innovation, Science and Economic Development Canada licence exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to cochannel mobile satellite systems.
CAN ICES-003(B)/NMB-003(B)

Radio Frequency (RF) Exposure Information

The radiated output power of the ASUS Wireless Device is below the Innovation, Science and Economic Development Canada radio frequency exposure limits. The ASUS Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.

This equipment should be installed and operated with a minimum distance of 29cm between the radiator any part of your body.

This device has been certified for use in Canada. Status of the listing in the Innovation, Science and Economic Development Canada’s REL (Radio Equipment List) can be found at the following web address:
https://www.ic.gc.ca/eic/site/ceb-bhst.nsf/eng/h_tt00020.html
Additional Canadian information on RF exposure also can be found at the following web:
https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf08792.html

This radio transmitter [3568A-RTAX5600] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device.

Set Ant. Brand P/N Type Connector Antenna Gain (dBi)
2.4GHz 5GHz (Band 1) 5GHz (Band 2) 5GHz (Band 3) 5GHz (Band 4)
1 1~4 WHA YU C660-510557-A Dipole 2.77 3.14 3.47 1.86 2.98

The maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725 MHz shall be such that the equipment still complies with the e.i.r.p. limit.

The maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as appropriate.

For indoor use only.

Safety Notices

  • Use this product in environments with ambient temperatures between 0°C(32°F) and 40°C(104°F).
  • Refer to the rating label on the bottom of your product and ensure your power adapter complies with this rating.
  • DO NOT place on uneven or unstable work surfaces. Seek servicing if the casing has been damaged.
  • DO NOT place or drop objects on top and do not shove any foreign objects into the product.
  • DO NOT expose to or use near liquids, rain, or moisture. DO NOT use the modem during electrical storms.
  • DO NOT cover the vents on the product to prevent the system from getting overheated.
  • DO NOT use damaged power cords, accessories, or other peripherals.
  • If the Adapter is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
  • To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
  • DO NOT mount this equipment higher than 2 meters.

All cables used to connect peripherals must be shielded and grounded. Operation with cables connected to peripherals that are not shielded and grounded may result in interference to radio and television reception.

References